Home  |  New for 2008  | Overview  | Standard Equipment  |  ConstructionOptions  |  Pricing | Location | Contact us
Construction  coach |  chassis |  accessories
 
 

COACH
 

 

4x4 Motor Home camper van class b motor home camper rv, motor home sales online rv, class a motor home pickup camper diesel motor home motor home dealer class b rv mini motor home cabover camper four wheel camper camper manufacturer camping rv class c rv 4x4 camper class b camper class b van camper 4x4 camper van design 4x4 camper vans class b rv for sale off road rv 4wd camper class b mini motor home tiger motorhomes 4x4 tigermotorhomes.com

 

  • Welded aluminum tube frame
  • Tongue and Groove Flooring
  • Ridged Cab to Coach Mounting

  • 5 Year Frame Warranty
  • Frame Supported Cabinets and Shelving

 

  • Dual GC2 6 volt deep cycle coach batteries in series 495 minutes at 25 amps.
  • Under floor storage sealed away from the interior.
  • Inside access for service and maintenance.

  • Expanding polyurethane foam seals between coach and chassis.
  • Adds strength and fills the void making coach and chassis one piece for a solid, quiet ride.

 

  • The wall thickness is 3" at the belly and is filled with high temp., non flammable fiber glass insulation, glued in place to prevent sagging.
  • Interior maintains 70˚ degrees at -15˚ degrees below 0˚.

  • The entire fresh water system including the main 33 gallon tank is inside the heated coach keeping the water system safe from freezing down to 0 degrees.
  • Water system drains completely through low point drains so no need for antifreeze in your fresh water system. Makes winter use much easier.
     

 

  • The light weight aluminum frame weighs just 70 lbs. complete.
  • Nothing compares to the strength and durability of a welded frame at all joints and corners.

  • Main frame extends below the floor to all skirting with aluminum inside coverings for road protection.
     

 

  • 2×2 steel box framing welded to chassis frame virtually eliminates frame twist and flex and allows the solid connection between coach and chassis.
  • Steel framing supports all outside corners, generator and LP supply.
  • 17 each .375" elevator bolts secure coach body to chassis frame.
  • 8 each .375" carriage bolts through cab to cabover.

  • All electrical wiring and tubing is bundled and clamped to prevent chaffing and rattling.
  • Main flooring is 3⁄4" tongue and groove.
     
  • The curved exterior walls have a heavy .040 aluminum skin with a flat surface interior reinforced with a welded aluminum tubing frame.
  • This compound curve design helps eliminate flex and motion and adds a bulk of insulation.
     
 
  • Screwed in windows and doors

 


                                                                                           back to top

 

Email Inquiry Tell a Friend
 
ProvanInd@aol.com
 
Call us directly at 1-800-531-9383!
© 2005 Provan Industries. All rights reserved.
Best viewed with 800 x 600 resolution or higher